Domain wall anisotropic magnetoresistance in planar nanowires

The anisotropic magnetoresistance AMR of individual magnetic domain walls in planar nanowires has been systematically investigated as a function of the micromagnetic wall structure, width, and thickness of the nanowire. Experimentally derived thickness dependence of both the thin film resistivity and the anisotropic magnetoresistance were incorporated into the calculations. We found that the AMR value can be used to identify the wall structure and that the wall resistance is sensitive to wire width for widths less than 300 nm. Furthermore, in comparison with the detailed analysis here, a previous simplified domain wall model significantly underestimates domain wall resistance in narrower wires

Exploring precision polymers to fine-tune magnetic resonance imaging properties of iron oxide nanoparticles

The use of bio-polymers as stabilising agents for iron oxide-based negative magnetic resonance imaging (MRI) contrast agents has become popular in recent years, however the wide polydispersity of biologically-derived and commercially available polymers limits the ability to produce truly tuneable and reproducible behaviour, a major challenge in this area. In this work, stable colloids of iron oxide nanoparticles were prepared utilising precision-engineered bio-polymer mimics, poly(2-acrylamido-2-methylpropane sodium sulfonate) (P(AMPS)) polymers, with controlled narrow polydispersity molecular weights, as templating stabilisers. In addition to producing magnetic colloids with excellent MRI contrast capabilities (r2 values reaching 434.2 mM−1 s−1 at 25 °C and 23 MHz, several times higher than similar commercial analogues), variable field relaxometry provided unexpected important insights into the dynamic environment of the hydrated materials, and hence their exceptional MRI behaviour. Thanks to the polymer’s templating backbone and flexible conformation in aqueous suspension, nanocomposites appear to behave as “multi-core” clustered species, enhancing interparticle interactions whilst retaining water diffusion, boosting relaxation properties at low frequency. This clustering behaviour, evidenced by small-angle X-ray scattering, and strong relaxometric response, was fine-tuned using the well-defined molecular weight polymer species with precise iron to polymer ratios. By also showing negligible haemolytic activity, these nanocomposites exhibit considerable potential for MRI diagnostics

On the 'centre of gravity' method for measuring the composition of magnetite/maghemite mixtures, or the stoichiometry of magnetite-maghemite solid solutions, via Fe-57 Mossbauer spectroscopy

We evaluate the application of 57Fe Mössbauer spectroscopy to the determination of the composition of magnetite (Fe3O4)/maghemite (γ-Fe2O3) mixtures and the stoichiometry of magnetite-maghemite solid solutions. In particular, we consider a recently proposed model-independent method which does not rely on a priori assumptions regarding the nature of the sample, other than that it is free of other Fe-containing phases. In it a single parameter, δRT—the ‘centre of gravity’, or area weighted mean isomer shift at room temperature, T = 295 ± 5 K—is extracted by curve-fitting a sample’s Mössbauer spectrum, and is correlated to the sample’s composition or stoichiometry. We present data on highpurity magnetite and maghemite powders, and mixtures thereof, as well as comparison literature data from nanoparticulate mixtures and solid solutions, to show that a linear correlation exists between δRT and the numerical proportion of Fe atoms in the magnetite environment: α = Femagnetite/Fetotal = − ( ) δ δ RT o /m, where δo = 0.3206 ± 0.0022mm s−1 and m = 0.2135 ± 0.0076mm s−1 . We also present equations to relate α to the weight percentage w of magnetite in mixed phases, and the magnetite stoichiometry x = Fe2+/Fe3+ in solid solutions. The analytical method is generally applicable, but is most accurate when the absorption profiles are sharp; in some samples this may require spectra to be recorded at reduced temperatures. We consider such cases and provide equations to relate δ ( ) T to the corresponding α value

Standardisation of magnetic nanoparticles in liquid suspension

Suspensions of magnetic nanoparticles offer diverse opportunities for technology innovation, spanning a large number of industry sectors from imaging and actuation based applications in biomedicine and biotechnology, through large-scale environmental remediation uses such as water purification, to engineering-based applications such as position-controlled lubricants and soaps. Continuous advances in their manufacture have produced an ever-growing range of products, each with their own unique properties. At the same time, the characterisation of magnetic nanoparticles is often complex, and expert knowledge is needed to correctly interpret the measurement data. In many cases, the stringent requirements of the end-user technologies dictate that magnetic nanoparticle products should be clearly defined, well characterised, consistent and safe; or to put it another way—standardised. The aims of this document are to outline the concepts and terminology necessary for discussion of magnetic nanoparticles, to examine the current state-of-the-art in characterisation methods necessary for the most prominent applications of magnetic nanoparticle suspensions, to suggest a possible structure for the future development of standardisation within the field, and to identify areas and topics which deserve to be the focus of future work items. We discuss potential roadmaps for the future standardisation of this developing industry, and the likely challenges to be encountered along the way

Unravelling the growth mechanism of the co-precipitation of iron oxide nanoparticles with the aid of synchrotron X-Ray diffraction in solution

Co-precipitation is the most ubiquitous method for forming iron oxide nanoparticles. For a typical co-precipitation synthesis, the pH of a ferrous and/or ferric ion solution is increased via the addition of a base. The latter can be added either slowly (a steady addition over either minutes or hours) or fast (a one-time addition) resulting in an abrupt increase in the pH. However, understanding the mechanism of particle formation is still lacking, which limits the reproducibility of the co-precipitation reaction due to intermediate phases still being present in the final product. In this work, we study in detail a co-precipitation synthesis with an abrupt increase in pH via the addition of sodium carbonate. Fast and reproducible mixing at defined precursor and base solution temperatures was achieved utilising a flow reactor. Transmission electron microscopy, electron diffraction and room temperature 57Fe Mössbauer spectroscopy showed a distinct transition from an amorphous ferrihydrite phase to a mixture of magnetite-maghemite (Fe3O4/γ-Fe2O3). Synchrotron X-ray diffraction revealed the initial formation of crystalline iron hydroxide carbonate (green rust) plates occurring before the Fe3O4/γ-Fe2O3 appeared. The ferrihydrite particles increase in size over time as the proportion of iron hydroxide carbonate plates are re-dissolved into solution, until the ferrihydrite particles crystallise into Fe3O4/γ-Fe2O3

Prenormative verification and validation of a protocol for measuring magnetite-maghemite ratios in magnetic nanoparticles

An important step in establishing any new metrological method is a prenormative interlaboratory study, designed to verify and validate the method against its stated aims. Here, the 57Fe Mössbauer spectrometric 'centre of gravity' (COG) method was tested as a means of quantifying the magnetite/maghemite (Fe3O4/γ-Fe2O3) composition ratio in biphasic magnetic nanoparticles. The study involved seven laboratories across Europe and North and South America, and six samples—a verification set of three microcrystalline mixtures of known composition, and a validation set of three nanoparticle samples of unknown composition. The spectra were analysed by each participant using in-house fitting packages, and ex post facto by a single operator using an independent package. Repeatability analysis was performed using Mandel's h statistic and modified Youden plots. It is shown that almost all (83/84) of the Mandel h statistic values fall within the 0.5% significance level, with the one exception being borderline. Youden-based pairwise analysis indicates the dominance of random uncertainties; and in almost all cases the data analysis phase is only a minor contributor to the overall measurement uncertainty. It is concluded that the COG method is a robust and promising candidate for its intended purpose

Surface radio-mineralisation mediates chelate-free radiolabelling of iron oxide nanoparticles

We introduce the concept of surface radio-mineralisation (SRM) to describe the chelate-free radiolabelling of iron-oxide and ferrite nanoparticles. We demonstrate the effectiveness of SRM with both 111In and 89Zr for bare, polymer-matrix multicore, and surface-functionalised magnetite/maghemite nanoparticles; and for bare Y3Fe5O12 nanoparticles. By analogy with geological mineralisation (the hydrothermal deposition of metals as minerals in ore bodies or lodes) we demonstrate that the heat-induced and aqueous SRM process deposits radiometal-oxides onto the nanoparticle or core surfaces, passing through the matrix or coating if present, without changing the size, structure, or magnetic properties of the nanoparticle or core. We show in a mouse model followed over 7 days that the SRM is sufficient to allow quantitative, non-invasive, prolonged, whole-body localisation of injected nanoparticles with nuclear imaging

Transverse Domain Wall Profile for Spin Logic Applications

Domain wall (DW) based logic and memory devices require precise control and manipulation of DW in nanowire conduits. The topological defects of Transverse DWs (TDW) are of paramount importance as regards to the deterministic pinning and movement of DW within complex networks of conduits. In-situ control of the DW topological defects in nanowire conduits may pave the way for novel DW logic applications. In this work, we present a geometrical modulation along a nanowire conduit, which allows for the topological rectification/inversion of TDW in nanowires. This is achieved by exploiting the controlled relaxation of the TDW within an angled rectangle. Direct evidence of the logical operation is obtained via magnetic force microscopy measurement

Sexual (Dis)satisfaction and Its Contributors Among People Living with HIV Infection in Sweden

Earlier research reports lower sexual satisfaction among people living with HIV (PLHIV) compared to HIV-negative persons. A number of psychosocial factors directly associated with sexual dissatisfaction have been identified. Little is known about sexual satisfaction and their contributors among PLHIV in Sweden. The aim of this study was to examine direct and indirect effects of variables within sociodemographic, clinical HIV-related, psychological, and sexual domains on sexual(dis)satisfaction among PLHIV in Sweden. Data for this study was derived from a national representative, anonymous survey among PLHIV conducted in 2014 (n=1096). Statistical analysis included four steps: descriptive analyses, identification of variables associated with sexual (dis)satisfaction, identification of variables associated with those contributors of sexual (dis)satisfaction, and a path model integrating all these analyses. A total of 49% of participants reported being sexually dissatisfied and no significant differences were observed when non-heterosexual men, heterosexual men and women were compared. Among women, a negative change in sex life after HIV diagnosis and distress with orgasmic difficulties were directly associated with sexual dissatisfaction. For men, hopelessness, high HIV stigma, sexual inactivity in the last 6 months, and a negative change in sex life after HIV diagnosis were directly associated with sexual dissatisfaction. Path analyses showed in both men and women significant indirect association between not being involved in an intimate relationship, lower self-reported CD4 cell counts, and perceiving obligation to disclose HIV status to sexual partners as a barrier to look for a long-term partner and sexual dissatisfaction. Our results show that despite good treatment outcomes, the HIV diagnosis has a negative bearing on sexual satisfaction. The need for gender-tailored interventions and clinical implications of these findings are discussed